Plastimo loopbanden geel 7 meter (per2)

Polyester webbing, 30 mm wide.Breaking strain : 2000 DaN. Tips & tricks
The installation of jacklines is essential to allow shifting location on the deck, while remaining clipped to a strongpoint at all times. Unfortunately, this vital element of the "harness-tether-jackline" set is often neglected or, worse still, is often the result of a "DIY" assembly done by a non-safety specialist.
basic rules reminder :

A jackline must be rigged only on strong points designed for that purpose.
Strong points must be mounted through deck, with a reinforcing plate below deck, and must resist 3 tons minimum.
A jackline must run free of knots, and sewn joints must be tested and calibrated. Jacklines should be positioned as far inboard as possible, in order to prevent falling over board.
Web jacklines will not roll under foot, as opposed to rope. Being made of fibres, jackline webbing is subject to ageing -even with no visible signs- due to UV-rays, sea water and temperature. Ideally, jacklines should be taken down, rinsed and stored in a dry place for wintering. Still, we stronly recommend to replace them regularly ; to be more specific, jacklines must be replaced after a cumulated period of 2 years of outdoor exposure.

Models

Length
Colour
Ref.


7 m
Yellow
36215


8 m
Yellow
36216


9 m
Yellow
36217


10 m
Yellow
36218


14 m
Yellow
62102


17 m
Yellow
62103


6 m
White
39447


7 m
White
39448


8 m
White
39449


9 m
White
39450


10 m
White
39451


6 m
Yellow
36214


decorateTable('models-table')