Motor anode Volvo Small plate

ZINC, compliant with MIL-A-18001K. Tips & Tricks
Standard anodes protect elements common to all boats (shafts, hull...).Some anode models are specific to a motor or thruster brand (always refer to the manufacturer’s recommendations).
INSTALLATIONThe anode must be in direct contact with the metal it protects : never paint around an anode or the anode itself.Do not fit magnesium anodes on wooden hulls as it would deteriorate the boat structure.
WHEN SHOULD ANODES BE REPLACED ?Anodes deterioration rate may fluctuate according to the mooring area, water salinity, PH and temperature, potential electrical failure on board, and of course, the quality of the anodes themselves.A good benchmark for replacement is when the anode is 70-80 % dissolved. Plastimo recommends to replace anodes every year when doing the boat antifouling/launching. In all cases, anodes deterioration should always be watched carefully together with the condition of the metal parts they protect.
IMPORTANT :On the opposite, anodes may dissolve quickly if they are bad quality or if there is an electrical failure on board (check the batteries, the right earth connection to the dock, the proper cathodic protection of your marina neighbours, ... ).Models

Ref.
Orig. code
Series
Weight






38297
875821
Duo Prop 290
0.670 kg




38303
872793
Duo Prop 290
0.1 kg




38294
875815
280-290 E Single Prop
0.750 kg




47419
832598
250-270-280-285
0,9 kg




38298
852018
110, 120 S-B, S-C
0,1 kg




38295
875812
S Drive 110
0.960 kg




38296
876286
S Drive 120
0.560 kg




38299
3854130
S Drive - SX Drive
1 kg




420996
3858399

0.180 kg




38301
872139
DPX
0,7 kg




38302
852835
Duo Prop
0.850 kg



decorateTable('models-table')